With the rapid development of laser technology, the traditional way of cutting branches can no longer meet people’s needs. Therefore, the advent of the equipment using laser to cut tree branches ( laser to cut down tree) has replaced the traditional way of cutting branches with low efficiency, heavy manual labor, and high risks.
This article will focus on using laser to cut tree branches (using laser to cut tree branches video), hoping to provide effective help for cutting branches.
What is Laser obstacle remover
Laser obstacle remover (Tree cutting laser cannon) : A laser obstacle remover is used on the ground to aim at the tree branches through the pan-tilt system. The laser is focused on the surface of the branch through the optical focusing system.
After absorbing the instantaneous high energy of the laser, the temperature rises sharply and the branch is burned off.
Using laser to cut tree branches YouTube video
¿Cuánto cuesta usar láser para cortar ramas de árboles?
Using Laser to Cut Tree Branches Cost is mainly related to the power of cutting branches, branch width, configuration, distance, etc.
- 200kw laser cannon for tree cutting price : $ 12532.55
- 500w Tree cutting laser Machine price: $ 18102.58
- 1000w laser to cut tree branches price: $ 25065.11
- 2000w laser to cut tree branches price: $ 32027.64
Laser to cut tree branches for sale features:
Potencia del láser: 150-1000W
Remote operation range: ≤300 meters
Operation time: It takes about 10 to 20 minutes to clear a tree obstacle with a diameter of 5 to 10 cm.
Single-point aiming: Only one branch can be aimed and cleared at a time, and the efficiency of clearing a large number of tree obstacles is low.
Affected by wind speed: At wind speeds above level 4, the branches sway, the laser is difficult to focus continuously, and the work efficiency decreases.
Potential risks: High-energy laser beams may cause harm to personnel and wires.
Laser obstacle clearers are suitable for remote processing of small-scale, single tree obstacles such as floating objects hanging on wires. They have the advantage of precise cutting, but are restricted by single-point aiming and wind speed, and their efficiency in clearing large areas of tree obstacles is low, and there are certain safety risks.
